Orca: Lignum

Veneer finish doors for healthcare

The Orca Doors Lignum range is a doorset with a finish achieved using a high quality veneer, which is UV coated to show the natural beauty of the timber, giving a warm tactile feel whilst having long lasting protection from the UV cured lacquer. The standard Orca timber range covers the most frequently used timbers, but many other veneers are available and can be supplied upon request.

All of the Lignum range for healthcare is coated with a UV cured lacquer that contains an antibacterial agent. This same ingredient is used for the coating on any glazing beads, lippings and frames that have exposed timber. To further fulfill the requirements of infection control, the Orca standard glazing bead has a tight synthetic seal between the glass and the bead.

Manufactured from a high quality core, Orca can manufacture the Lignum doorset to suit your requirements, be that a non fire rated door, a FD30 or FD60, and with matching or contrasting frame finishes, edging finish, vision panels and beading finish.

Detail is the key to the high quality finish of Orca doorsets, from original specification to final production. At Orca the emphasis is on the right product for the job, so we can accommodate a wide range of styles and finishes.

.

Door Frames

Orca can offer a variation of frames, from linings with planted stops to solid casings with stops machined in. These can be supplied ready to paint, pre finished with antibacterial lacquer, or full encapsulated in 2mm PVC, making them extremely durable.

Glazing

When installing vision panels, Orca ensure that all standards are met, whether it be for fire or acoustic rating. Glass can be fitted in a huge range of sizes and configurations, and guidance can be given to achieve best results. Where timber glazing beads are installed, these are coated with an antibacterial lacquer, and where possible, a synthetic seal keeps the bead tight to the glass, assisted infection control. For the Intego range, Orca can also wrap the glazing bead cassette in a single piece of PVC, eliminating any mitre joints where there is a possible infection control risk.

.

.

Lippings

Lippings are installed on all four edges, and are manufactured into the door so the PVC creates a smooth radius into the door edge. Standard sizing for Orca is a 10mm lipping on the horizontal, and 16mm in the vertical legs, in which the intumescent is installed.

Ironmongery

Ironmongery can be installed in the factory, where you can be assured that not only will the quality of the install be to your requirement, but that any fire certification has been retained. Orca can advise on suitable items and methods of installation to achieve fire standards. Using our in house team too apply hinges and locks gives a tight, neat finish, as cutting items into a radius PVC edge on site is extremely difficult.

.

Helpful Downloads

Catalogue
– Technical Data Sheet (30 minutes60 minutes)
O&M Manual

To speak to a member of our team about this product please call 01482 682897 or alternatively click here.

CLICK HERE TO DISCUSS YOUR PROJECT WITH US OR CALL 01652 682897

orca-doors

Orca Doors
Limber Road
Kirmington
North Lincolnshire
DN39 6YP

Tel: 01652 682897
Email: info@orcadoors.net